Replacing A License Plate Light Bulb - Yamaha XV17PCS Owner's Manual

1. Turn signal light bulb
3. Insert a new bulb into the socket,
push it in, and then turn it clock-
wise until it stops.
4. Install the lens by installing the
screws.
CAUTION:
Do not overtighten the screws, oth-
erwise the lens may break.
PERIODIC MAINTENANCE AND MINOR REPAIR
Replacing a license plate light
bulb
1. Remove the license plate light unit
by removing the nuts, washers and
rubber dampers.
1. Nut
ECA10680
2. Washer
3. Rubber damper
4. License plate light unit
2. Remove the license plate light lens
by removing the nuts and washers.
3. Remove the defective bulb by pull-
ing it out.
EAU24321
1. Nut
2. Washer
3. Bulb
4. License plate light lens
4. Insert a new bulb into the socket.
5. Install the license plate light lens
6. Install the license plate light unit by
6-36
by installing the washers and the
nuts.
installing the rubber dampers,
washers and the nuts.
6