Helmet holder
1. Helmet holder
The helmet holder is located under the
rider seat.
To secure a helmet to the helmet
holder
1. Remove the rider seat. (See page
3-9.)
2. Attach the helmet to the helmet
holder, and then securely install
the seat.
WARNING
Never ride with a helmet attached to
the helmet holder, since the helmet
may hit objects, causing loss of con-
trol and possibly an accident.
INSTRUMENT AND CONTROL FUNCTIONS
EAU14320
To release the helmet from the hel-
met holder
Remove the rider seat, remove the hel-
met from the helmet holder, and then
install the seat.
EWA10160
Adjusting the front fork
This front fork is equipped with spring
preload adjusting bolts.
Always adjust both fork legs equal-
ly, otherwise poor handling and loss
of stability may result.
Adjust the spring preload as follows.
1. Spring preload adjusting bolt
To increase the spring preload and
thereby harden the suspension, turn
the adjusting bolt on each fork leg in di-
rection (a). To decrease the spring pre-
load
suspension, turn the adjusting bolt on
each fork leg in direction (b).
3-10
WARNING
and
thereby
soften
EAU14720
EWA10180
3
the