Technical Data; Specification - Stanley STHM5KS Manual

ENGLISH
Cleaning
Warning! Blow dirt and dust out of the main
housing with dry air as often as dirt is seen
collecting in and around the air vents. Wear
approved eye protection and approved dust mask when
performing this procedure.
Warning! Never use solvents or other harsh
chemicals for cleaning the non-metallic parts of
the tool. These chemicals may weaken the
material of the parts. Use only mild soap and damp cloth to
clean the tool. Never let any liquid get inside the tool; never
immerse any part of the tool into liquid.

Technical data

SPECIFICATION

Voltage V
Frequency Hz
Power W
Impact rate bpm
Impact energy J
Chuck type
Weight kg
8
(Original instructions)
STHM5
220-240
50/60
1010
2900
8.5
SDS Max
6.3