Load Paper; Install Software - Epson Stylus Photo R800 Start Here Manual

5
5

Load Paper

Load Paper
1
Fan your paper and place it against the right
side of the sheet feeder (up to the arrow inside
the edge guide).
2
Slide the left edge guide to fit lightly against
the paper.
6
6

Install Software

Install Software
Windows
Follow the steps below to install the software for your version of Windows.
Windows XP or 2000
1
Make sure your printer is connected and turned on.
Then turn on your computer.
2
Wait for Windows to detect your printer and display a
screen like this:
DON'T CLICK ANY BUTTONS ON THIS SCREEN YET.
NOTE: If a screen like this doesn't appear, make
sure your printer is turned on and connected.
If you're using Windows XP, you may need to
select No, not this time, then click Next.
3
Put the Epson ®
DVD-ROM drive.
Windows XP: Wait a few seconds for the CD-ROM
to be recognized.
Windows 2000: Click Next and follow the on-screen
instructions to install your software from the CD-ROM.
4
Your printer software installs automatically and various
messages appear on the screen. At the final screen,
click Finish.
5
When you see the license agreement, read and
agree to it to continue the installation. You see
the Options Menu:
6
Click Install Optional Software.
Now go to "Installing Optional Software" in the next column.
Windows 98SE or Me
1
Make sure your printer is connected and turned on.
Then turn on your computer.
2
Wait for Windows to detect your printer and display
a screen like this:
DON'T CLICK ANY BUTTONS ON THIS SCREEN YET.
NOTE: If a screen like this doesn't appear, make
sure your printer is turned on and connected.
3
Put the Epson CD-ROM in your CD-ROM or
DVD-ROM drive and wait a few seconds for the
CD-ROM to be recognized.
4
Click Next on the Add New Hardware Wizard screen.
Windows 98SE: Go to step 5.
Windows Me: Go to step 8.
CD-ROM in your CD-ROM or
continued