Install Ink Cartridges - Epson Stylus Photo R800 Start Here Manual

4
4

Install Ink Cartridges

Install Ink Cartridges
CAUTION: Don't load paper before you install the ink
cartridges so the paper doesn't interfere with ink charging.
1
Open the output tray, pull out its extensions,
and open the printer cover.
2
Release and open the cartridge cover, then remove the protective sheet inside.
3
Shake the ink cartridge packages 4 or 5 times
before opening them. (Don't shake them after
they're unpacked.)
4
Remove the ink cartridges from
their packages.
CAUTION: Don't remove any labels
or seals from the cartridge.
5
Slide each cartridge individually into its slot with
the green part facing the front.
Make sure the colors on the cartridges match the
labels inside the cartridge cover.
Then push each one down until it clicks into place.
6
Close the cartridge cover and press it down until
it clicks into place.
7
Close the printer cover, then press the
The green power and red
printer charges ink for about 2
CAUTION: Don't turn off the printer
or interrupt charging, or you'll waste
ink. If the
don't turn off after 5 minutes, and
the printer isn't making any noise,
you can turn it off.
ink lights flash as your
1 / minutes.
2
power and ink lights
ink button.
Don't touch the green part