Connect The Printer; Turn On The Printer - Epson Stylus Photo R800 Start Here Manual

2
2

Connect the Printer

Connect the Printer
Connection cables are not included with your printer. You need only one of the following cables.
NOTE: Do not connect both cables.
• USB cable (preferably a Hi-Speed USB 2.0 cable for Windows
• IEEE-1394 or FireWire
USB Cable Users
1
Shut down your computer.
Leave your computer turned off until section 6.
2
Plug the flat
(You can use any open USB port.) Don't force the connector into its slot.
3
Plug the square
IEEE-1394 or FireWire Cable Users
1
Shut down your computer.
Leave your computer turned off until section 6.
2
Plug one end of the cable into your printer's IEEE1394 port.
3
Plug the other end of the cable into your computer's IEEE-1394 port.
3
3

Turn On the Printer

Turn On the Printer
1
Plug the printer's power cord into a grounded electrical outlet.
2
Press and hold the
CAUTION: Never use an external switch, such as a wall switch
or power strip switch, to turn the printer on or off.
™ cable
end of the cable into your computer's USB port until it stops.
end of the cable into your printer's USB port until it stops.
Square end
power button and then release it to turn on the printer.
2000 or XP) or
®
Flat end