Table of Contents
Advertisement
EQUIPMENT LIST
Name
Type
Transducer
2
520-5PSD (*
)
2
520-5MSD (*
)
2
525-5PWD (*
)
2
520-PLD (*
)
2
525T-BSD (*
)
2
525T-PWD (*
)
2
SS60-SLTD/12 (*
)
2
SS60-SLTD/20 (*
)
2
525T-LTD/12 (*
)
2
525T-LTD/20 (*
)
2
50/200-1T *10M* (*
)
2
526TID-HDD (*
)
50B-6 *10M*
50B-6B *15M*
200B-5S *10M*
CHIRP Transducer
TM150M
B-75L
B-75H
B-175L
B-175H
Termination Resistor
FRU-MF000000001
(Micro)
FRU-MM1000000001
Micro T-Connector
FRU-MM1MF1MF1001
Cable Assembly
FRU-NMEA-PFF-010
FRU-NMEA-PFF-020
FRU-NMEA-PFF-060
FRU-NMEA-PMMFF-
010
FRU-NMEA-PMMFF-
020
FRU-NMEA-PMMFF-
060
1
Operator's Manual
OME-45040-x*
1
*
: "x" indicates revision/version number.
2
™
*
: Compatible with ACCU-FISH
, Bottom Discrimination and RezBoost
2
listed transducers marked with "*
" are compatible with RezBoost
3
*
: Use of the extension cable may cause the following: reduction in detection performance, in-
™
correct ACCU-FISH
information, wrong speed data and/or incorrect TD-ID recognition.
4
*
: All optional items are manufactured by FURUNO ELECTRIC CO., LTD. Contact your
FURUNO local dealer for purchase.
Code No.
Remarks
000-015-204-00
Select one
Note: The following trans-
000-015-212-00
ducers require Matching
000-146-966-00
Box MB-1100 for installa-
tion:
000-023-680-00
• 50/200-1T *10M*
000-023-020-00
• 50B-6 *10M*
000-023-019-00
• 50B-6B *15M*
• 200B-5S *10M*
000-023-676-00
000-023-677-00
000-023-679-00
000-023-678-00
000-015-170-00
000-023-021-00
000-015-042
000-015-043
000-015-029
000-035-550
-
000-035-501
000-035-502
000-035-503
000-035-504
001-507-060
-
001-507-070
-
001-507-050
-
001-507-010
-
001-507-030
-
001-507-040
-
001-506-820
-
001-506-830
-
001-507-000
-
1
Printed manual
000-195-462-1x*
™
Enhanced mode. All
™
Standard mode.
v
1.
INSTALLATION
1.1
Display Unit Installation
The Display Unit (SMD7 or SMD9) can be mounted in one of two ways: desktop
(bracket) or flush mount (in the console, etc.).
When selecting a mounting location, keep the following points in mind:
• Determine the suitability of the mounting location before permanently mounting the
unit. Bulkheads and roofs can affect the incoming/outgoing signals, depending on
the shape of the vessel, preventing communication with the radar sensor. Signals
are strongest to the fore/aft direction of the unit; weakest to either side of the unit.
Strong signal area
Weak signal
Weak signal
area
area
Approx. 30°
Approx. 30°
Strong signal area
SMD7/SMD9 - Top view
The unit should be located within the following distances from the radar sensor, to
ensure a stable connection.
Vessels with no obstructions: approximately 5 m, or less.
Vessels with obstructions: approximately 2 m, or less. (Avoid locations where the
obstruction(s) are composed of metal, carbon-fiber, or similar materials.)
• There should be no interfering objects within the line-of-sight to the satellites. An ob-
ject within line-of-sight to satellites, for example, a mast, may block reception or pro-
long acquisition time. Select a location out of the radar and inmarsat beams. Those
beams will obstruct or prevent reception of the GPS satellite signal.
• Locate the unit away from areas subject to water splash and rain.
• The operating temperature range of this unit is -15°C to +55°C. Be sure the mount-
ing location satisfies this requirement.
• Locate the unit away from exhaust pipes and vents.
• The mounting location should be well ventilated.
• Mount the unit where shock and vibration are minimal.
• Keep the unit away from electromagnetic field-generating equipment such as mo-
tors and generators.
• Select a location away from VHF/UHF antennae, to avoid interference caused by
harmonic waves.
• Referring to the outline drawings at the back of this manual, leave sufficient room
for service and maintenance.
Approx. 30°
Approx. 30°
Weak signal
Weak signal
area
area
1
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
