Mitsubishi Electric MXZ-2HA40VF-E1 Service Manual page 69

13-2. MXZ-3HA50VF
NOTE: Turn OFF the power supply before disassembly.
OPERATING PROCEDURE
1. Removing the cabinet and the panels
(1) Remove the screws of the service panel, and remove the
service panel.
(2) Disconnect the power supply and indoor/outdoor connect-
ing wire.
(3) Remove the screws of the top panel, and remove the top
panel.
(4) Remove the screws of the cabinet, and remove the cabi-
net.
(5) Remove the screws of the back panel, and remove the
back panel (Photo 3).
Photo 3
Screw of the rear guard
Screws of the
back panel
Screws of
the back panel
OBH828B
Screws of the
back panel
69
PHOTOS
Photo 1
Screws
of the
sub
panel
Screws of the cabinet
Photo 2
Screws of
the cabinet
Screws of the
top panel
Screws of the
cabinet
Screws of the
top panel
Screws of
the cabinet
Screws of
service
panel
Screws of the
sub panel