Midea TMF No Frost Series Service Manual page 29

1-Power cord
2-Dry filter
3-Compressor
Disassembly and assembly of compressor
1） Cut off the power, remove the goods in the refrigerator,
with the tape to make the door fixed firmly and prevent
the door dropping when the refrigerator dumping.
2） Slowly tilt the refrigerator forward, relying on the wall or
a solid enough object, leaving space to facilitate the
operation. For safety, it should be carried by someone to
prevent its falling.
3） Cut off the compressor pipeline.-❶Cut off the process
pipeline.-❷Cut off the low-pressure muffler.-❸Cut off
the high-pressure exhaust pipe.
4-1）Remove the screws(for some models)
-Two screws outside
-One screw inside
4-Drain tray 1
5-Suction connection tube6-Drain tray 2
29
Service Manual_2020-V1.0