VELOCITY PRESSURE / VELOCITY EXAMPLES
The Velocity Pressure/Velocity function uses an entered value to
calculate these four values:
1. Velocity (FPM)
2. Velocity (Pressure)
3. Metric Velocity (MPS)
4. Metric Velocity Pressure Number entered is assumed to be
(kPA)
The first time you perform this function, the values are displayed in
the order identified above. Subsequent calculations begin with the
last displayed value.
Converting Velocity Pressure to FPM
After obtaining Velocity Pressures (VP) from taking a traverse, your
calculator easily converts to Feet per Minute (FPM).
For example, convert the following VPs to FPM:
0.049"
0.123"
0.027"
KEYSTROKE
1. Enter first VP and convert to FPM:
o o
• 0 4 9 Ç 0*
2. Enter second VP and convert to FPM:
• 1 2 3 Ç 0
3. Enter third VP and convert to FPM:
• 0 2 7 Ç 0
*The VP
FPM function begins with the last displayed value. If FPM is not displayed
with the first press of Ç 0, continue pressing 0 until FPM is displayed.
ß ©
46 — S
M
HEET
ETAL
Number entered is assumed to be
Velocity Pressure
Number entered is assumed to be
Velocity (FPM)
Number entered is assumed to be
Metric Velocity Pressure (kPA)
Metric Velocity (MPS)
/HVAC P
RO
C
ALC
DISPLAY
0.
FPM 886.5445
FPM 1404.608
FPM 658.0887