Transporting The Printer; Related Documentation - Epson Stylus Photo 780 Product Information

Epson stylus photo 780: product information

Hide thumbs Also See for Stylus Photo 780:

Table of Contents

EPSON Stylus Photo 780

Transporting the Printer

If you move your printer some distance, you need to prepare it

for transportation in its original box or one of a similar size.

Follow these steps:

To avoid damage, always leave the ink cartridges

installed when transporting the printer. Be sure to

remove the tape used in step 4 after installing the printer

in its new location.

1. Turn on the printer, wait until the print head locks in the

far right position, then turn off the printer.

2. Unplug the power cord from the electrical outlet. Then

disconnect the printer cable from the printer.

3. Remove any paper from

the printer and remove

the paper support.

4. Open the printer cover.

Secure the ink cartridge

holder to the printer with

tape as shown, then close

the printer cover.

5. Push in the output tray extension and close the tray.

6. Repack the printer and attachments in the original box

using the protective materials that came with it. See the

Start Here sheet.

Be sure to keep the printer level as you transport it. After

transporting the printer, remove the tape securing the print

head and then print a document to test the output.