Control Panel; Installing Ink Cartridges For The First Time - Epson Stylus Photo 780 Product Information

Epson stylus photo 780: product information
Hide thumbs Also See for Stylus Photo 780:
Table of Contents

Advertisement

EPSON Stylus Photo 780
.
EPSON 4 × 6-inch
Photo Paper *
(dotted lines indicate
perforations)
A:
The maximum top margin is 0.67 inch (17.0 mm).
L & R: The maximum left and right margin is 0.24 inch (6.1 mm).
The minimum left and right margin is 0.12 inch (3.0 mm).
C:
The maximum bottom margin is 0.24 inch (6.1 mm).
EPSON 4 × 6-inch Photo Paper is 4.5 × 6.9 inches
*
(114.3 × 175.3 mm), including the perforated margins. The
printable area is 4 × 6 inches (101.6 × 152.4 mm).
To ensure good results, use genuine EPSON cartridges
and do not refill them. Other products may cause
damage to your printer not covered by EPSON's
warranties.
Don't use an ink cartridge if the date on the package has
expired.

Control Panel

You can diagnose some problems by checking the printer's
control panel lights, as described below, or running a printer
check, as described on page 5.
error light
ink cartridge
replacement
button
P is on
The Ppower light is on when the printer is ready to print.
It flashes when the printer is receiving a print job, charging
ink, or cleaning the print head.
EPSON Stylus Photo 780
4 -
A
L & R
C
power light
power button
maintenance
button
1/01
b
b
is on
When the
error light is on, paper is out or loaded
incorrectly, or you have a paper jam. If necessary, load or
reload paper and press the
paper is jammed, press the
to clear the jam. If that doesn't work, turn off the printer
and gently pull out all the paper. Turn on the printer and
b
press the
maintenance button to resume printing.
b
When the
error light is on and your paper is loaded
correctly and not jammed, you need to replace an ink
cartridge. Determine which cartridge is out of ink and
replace the cartridge as described on page 6.
b
b
flashes
When the
error light flashes, your ink supply is low.
Determine which cartridge is low as described on page 7
and make sure you have a replacement cartridge.
P is off
When the Ppower light is off and the
and
jammed paper may be blocking movement of the print
b
is on
head. Turn off the printer, open the cover, and check
inside for any jammed paper. Then turn the printer back
on. If the lights are still in the same state, contact your
dealer or EPSON.
b
P and
When both lights flash as you're replacing an ink cartridge,
flash
the flash pattern indicates which cartridge is low on ink, as
described on page 7.
If you're not replacing ink but both lights are flashing, your
printer may have an internal error. Turn off the printer,
wait a few seconds, and turn it on again. If the lights still
flash, contact your dealer or EPSON.
b
P and
When both lights are off, the printer is not receiving
are off
power. Try these solutions:
Make sure the printer is turned on.
Turn off the printer, plug in the power cord securely,
and turn on the printer again.
Make sure the outlet is operable and is not controlled
by a switch or timer. If in doubt, try using another
outlet.
Installing Ink Cartridges for the First
Time
1. Lower the printer's output tray (A) and open the cover (B).
2. Plug in the printer and press the Ppower button to turn
it on.
b
maintenance button. If
b
maintenance button to try
b
error light is on,
A
B

Advertisement

Table of Contents
loading

Table of Contents