Table of Contents
Advertisement
en Troubleshooting
Fault
lights up.
flashes.
All other error codes.
Malfunctions
Fault
The appliance is not work-
ing.
The programme does not
start.
56
Cause
Detergent dosage is too
high.
The temperature is too high.
Water level is too high.
Laundry is caught in the
door.
Door is not closed.
Malfunction
Cause
The mains plug of the power
cord is not plugged in.
The circuit breaker is faulty.
There has been a power cut.
You have not pressed
Door is not closed.
troubleshooting
Immediate measure: Mix one table-
▶
spoon of fabric softener with 0.5
litres of water and pour the mixture
into the compartment for manual
dosing (not for outdoor clothing,
sportswear or items stuffed with
down).
If intelligent dosing is activated, re-
▶
duce the "basic dosage"
→ Page 44.
If you dose manually, reduce the
▶
amount of detergent for the next
washing cycle with the same load.
Wait until the temperature has
▶
dropped.
→ "Cancelling the programme",
▶
Page 42
Start the Drain programme.
▶
Open the door again.
1.
Remove any trapped laundry.
2.
Close the door.
3.
Press
to start the programme.
4.
Close the door.
1.
Press
to start the programme.
2.
Call the after-sales service.
▶
→ "Customer Service", Page 66
troubleshooting
Connect the appliance to the power
▶
supply.
Check the circuit breaker in the
▶
fuse box.
Check whether the lighting in your
▶
kitchen or other appliances are
working.
.
Press
.
▶
Close the door.
1.
Press
to start the programme.
2.
Advertisement
Table of Contents
