Table of Contents
Advertisement
en Display
Display
1
50 ml
1
Example
24
Designation
Water consumption
End signal
Button signal
Display brightness
Reminder to clean the
drum
Dispenser for liquid de-
tergent
Dispenser for liquid de-
tergent or fabric
softener.
Basic dosage
Voltage control system Flashes: The automatic voltage control system detects
Voltage control system Flashes: The programme has been paused because of
Foam detection system The appliance has detected too much foam.
Description
Water consumption for the selected programme.
: Low water consumption
¡
: High water consumption
¡
Basic setting
Basic setting
Basic setting
Flashes: Drum is dirty. Run the Drum Clean pro-
gramme for cleaning and caring for the drum and the
outer tub.
→ "Cleaning the drum", Page 46
¡ Lights up: The intelligent dosing system for liquid
detergent is activated.
¡ Flashes: The fill level of the dispenser is below the
minimum level.
→ "Intelligent dosing system", Page 43
(liquid detergent)
¡ Lights up: The intelligent dosing system for liquid
detergent or fabric softener is activated.
¡ Flashes: The fill level of the dispenser is below the
minimum level.
→ "Intelligent dosing system", Page 43
(liquid detergent)
(fabric softener)
Basic dosage for detergent or fabric softener.
→ "Basic dosage", Page 44
impermissible voltage drops. This will pause the pro-
gramme.
→ "Error code / Fault display / Signal", Page 54
Note: The programme will continue when the voltage
is permissible again.
impermissible voltage drops. The voltage is permiss-
ible again and the programme will continue.
→ "Error code / Fault display / Signal", Page 54
Note: The programme duration is extended.
→ "Error code / Fault display / Signal", Page 54
Advertisement
Table of Contents
