Creating A Cloud Connector Profile; Setting Up Device Quotas - Lexmark MX824 User Manual

Setting up and using the home screen applications
Notes:
•
When creating a network destination, make sure to validate and adjust the settings until no errors
occur.
•
Only destinations created from the Embedded Web Server are saved. For more information, see the
documentation that came with the solution.
3
Apply the changes.
Creating a Cloud Connector profile
We recommend logging in to the printer before you create a profile. To enable a login method, see the
Embedded Web Server
1
From the home screen, touch Cloud Connector.
2
Select a cloud service provider.
3
Touch Create a Profile or
4
Type a unique profile name.
5
If necessary, enter a PIN.
Note: When using the printer as guest, protect the profile with a PIN.
6
Touch Create, and then take note of the authorization code.
Note: The authorization code is valid only for 24 hours.
7
Open a web browser, and then go to https://lexmark.cloud-connect.co.
8
Click Next, and then accept the Terms of Use.
9
Enter the authorization code, and then click Connect.
10
Log in to your cloud service provider account.
11
Grant permissions.
Note: To complete the authorization process, open the profile within 72 hours.

Setting up Device Quotas

You may need administrative rights to access the application.
1
Open a Web browser, and then type the printer IP address in the address field.
Notes:
•
View the printer IP address on the printer home screen. The IP address appears as four sets of
numbers separated by periods, such as 123.123.123.123.
•
If you are using a proxy server, then temporarily disable it to load the Web page correctly.
2
Click Apps > Device Quotas > Configure.
3
From the User Accounts section, add or edit a user, and then set the user quota.
4
Apply the changes.
‑
Security Admin Guide.
.
21