Epson Stylus Color Stylus Color II Software Setup Manual page 29

Note:
If you installed the printer driver using Windows 3.1 and will
upgrade to Windows 95, be sure to reinstall the driver using the steps
beginning on page 2-4 after you install Windows 95. This sets up the
driver correctly for Windows 95.
Now you can access the driver from your Windows programs
to control your printer settings; see page 2-7 for instructions.
Changing the default printer or printer port
If you do not want to use the EPSON Stylus COLOR II printer
driver as your default printer in Windows or if you want to use
it on a different printer port, follow these steps:
1. In the Main window, double-click the Control Panel icon.
2. Double-click the Printers icon. The Printers dialog box
appears.
3. In the Installed Printers pull-down list, select the printer you
want to use as your default printer.
4. Click the Set As Default Printer button.
If you do not need to change the printer port assignment for
the EPSON Stylus COLOR II printer, go to step 9.
5. To change the port assignment, select EPSON Stylus
COLOR II in the Installed Printer pull-down list.
6. Click the Connect button. You see the Connect dialog box.
7. In the Ports pull-down list, select the port to which you
want to assign the EPSON Stylus COLOR II printer. (See
the Windows Control Panel Help utility for instructions on
selecting other options in the Connect dialog box.)
8. Click OK to close the Connect dialog box.
Installing and Using the Printer Driver
2-3