Installing The Ink Cartridges - Epson Stylus Color Stylus Color II Software Setup Manual

2. Make sure the printer is turned off by checking the position
of the POWER switch, as shown below.
3. Plug the power cord into a properly grounded electrical
outlet.
4. Turn on the printer by pressing the POWER switch.

Installing the Ink Cartridges

Follow the steps in this section to install your printer's ink
cartridges.
Warning:
w
The ink cartridges are self-contained units. Under ordinary
use, ink will not leak from a cartridge. If ink gets on your
hands, wash them thoroughly with soap and water. If ink gets
into your eyes, flush them immediately with water.
Caution:
c
Do not open the ink cartridge packages until just before you
install them or they may become too dry.
Installing the Printer
1-5