Epson Stylus Color Stylus Color II Software Setup Manual page 31

Color inkjet printer for windows
Hide thumbs Also See for Stylus Color Stylus Color II:
Table of Contents

Advertisement

8. If you inserted the diskette in drive A, click OK. Otherwise,
change the drive letter in the Copy manufacturer's files
from box and click OK. You see the Select Device screen.
9. Make sure your printer model name is selected in the
Models pull-down list and click OK.
10. At the next screen you can give the printer a unique name.
We recommend that you keep the model name, but you
can type a new one in the Printer name box, if desired.
To use the printer as the default printer for all Windows 95
applications, select Yes (No is the default).
11. Click the Next button.
12. At next screen, select Yes to print a test page.
13. Click the Finish button. The program copies the files to your
hard disk and adds an icon using the printer name to the
Windows 95 Printers group.
14. Select Yes again at the test page confirmation screen if the
page printed correctly. (If it did not print correctly, there is
probably a problem with the printer connection; check the
connection and start over.)
Then your computer finishes loading Windows 95.
Your printer driver is now installed. To install the rest of your
printer software and create an EPSON program folder for your
software, follow the steps in the next section.
Installing and Using the Printer Driver
2-5

Advertisement

Table of Contents
loading

This manual is also suitable for:

Stylus color ii

Table of Contents