Transporting The Printer; Related Documentation - Epson Stylus Color 980N Product Information Manual

Epson stylus color 980n: product information

Hide thumbs Also See for Stylus Color 980N:

Table of Contents

Transporting the Printer

If you need to move your printer some distance, prepare it for

transportationby packing it in its original box. Follow these

steps:

To avoid damage, always leave the ink cartridges

installed when transporting the printer.

Be sure to remove the tape used in step 4 after installing

the printer in its new location.

1. Turn on the printer and wait until the print head locks in

the far right position. Then turn off the printer.

2. Unplug the power cord from the electrical outlet. Then

disconnect the network cable from the printer.

3. Remove any paper from the printer and remove the paper

support.

4. Open the printer cover. Secure the ink cartridge holder to

the printer with tape as shown, then close the printer cover.

5. Push in the output tray extensions and close the tray.

6. Repack the printer and attachments in the original box

using the protective materials that came with it. See the

unpacking sheet that was packed with your printer.

Be sure to keep the printer level as you transport it. If you

notice a decline in print quality after transporting the printer,

clean the print head (see page 11); if output is misaligned,

align the print head (see page 12).