Usb Device Charging - Tripp Lite UPB-10K0-2U Owner's Manual

USB Device Charging

Note:
• A button is located on the side of the Mobile Power Bank. When the button is
pressed once, the LED indicators will illuminate to show how much battery capacity
is left. When held down, the button turns off the LED indicators and stops any
device charging taking place. When pressed twice, the button turns the built-in LED
flashlight on/off.
• When charging a USB device, the LED indicators on the Mobile Power Bank will
illuminate in one of four combinations to indicate the following battery capacity
levels:
• 75-100% Capacity – 4 LEDs illuminated solid
• 50-75% Capacity – 3 LEDs illuminated solid
• 25-50% Capacity – 2 LEDs illuminated solid
• 5-25% Capacity – 1 LED illuminated solid
• 0-5% Capacity – 0 LEDs illuminated
1. Connect your mobile device to the USB-A port on the Mobile Power
Bank using the included USB Micro-B cable or a USB cable suitable for
your device.
2. The device will begin charging with the LED indicator light(s) illuminating
according to the combinations listed above.
18-08-421-93346A-EN.indd 3
3
9/6/2018 3:40:59 PM