Usb Device Charging - Tripp Lite UPB-12K0-2U Owner's Manual

USB Device Charging

Note:
• A button is located on the Mobile Power Bank next to the 5V, 2A USB-A port. When
the button is pressed once, the LED indicators will illuminate to show how much
battery capacity is left. When held down, the button turns off the LED indicators and
stops any device charging taking place. When pressed twice, the button turns the
built-in LED flashlight on/off.
• When charging a USB device, the LED indicators on the Mobile Power Bank will
illuminate in one of four combinations to indicate the following battery capacity
levels:
• 75-100% Capacity – 4 LEDs illuminated solid
• 50-75% Capacity – 3 LEDs illuminated solid
• 25-50% Capacity – 2 LEDs illuminated solid
• 5-25% Capacity – 1 LED illuminated solid
• 0-5% Capacity – 0 LEDs illuminated
1. Connect your mobile devices to the USB-A ports on the Mobile Power
Bank using the included USB Micro-B cable or a USB cable suitable for
your device.
2. The device will begin charging with the LED indicator light(s) illuminating
according to the combinations listed above.
15-06-040-93346B-EN.indd 3
3
6/16/2015 11:13:00 AM