Tripp Lite UPB-10K0-2U Owner's Manual page 4

Mobile Power Bank Charging
Note:
• A button is located on the side of the Mobile Power Bank. When the button is
pressed once, the LED indicators will illuminate to show how much battery capacity
is left. When held down, this button turns off the LED indicators and stops any
device charging taking place. When pressed twice, the button turns the built-in LED
flashlight on/off.
• When charging the Mobile Power Bank, its LED indicators will illuminate in one of
five combinations to indicate the following battery capacity levels:
• 95-100% Capacity – 4 LEDs illuminated solid
• 75-95% Capacity – 3 LEDs illuminated solid, with the 4th LED flashing
• 50-75% Capacity – 2 LEDs illuminated solid, with the 3rd LED flashing
• 25-50% Capacity – 1 LED illuminated solid, with the 2nd LED flashing
• 0-25% Capacity – 1 LED (first) flashing
• If the LED(s) continue to illuminate solid when initially connecting the charging
cable, disconnect and reconnect until the LED(s) begin blinking.
1. Using the included USB Micro-B cable, connect the Micro-B port located
on the Mobile Power Bank to the USB-A port on a computer or USB
charger.
2. The Mobile Power Bank will begin charging with the LED indicator lights
illuminating according to the combinations listed above.
18-08-421-93346A-EN.indd 4
4
9/6/2018 3:40:59 PM