Agilent Technologies 1168/9A User Manual page 96

2 Using Probe Heads
N2887A/8A Soft Touch Probe Heads
Retention Modules
96
You attach the probe heads to the PC board using a
retention module, which ensures pin- to- pad alignment and
holds the probe in place. A kit of five retention modules is
shipped with each probe head. Additional kits can be
ordered.
Table 16 Accessories / Replacement Parts
Part Number
E5405-68702
E5396-68702
N2887-60002
The Agilent specific probe head retention modules do not
match any other vendor's connectors. The footprint of the
probe heads do match other vendors, but the retention
modules do not match.
Figure 63 N2887A Retention Module Dimensions
Description
Retention Module Replacement kit for N2887A
Retention Module Replacement kit for N2888A
De-skew and Performance Verification Fixture
1168/9A Probes User's Guide