Agilent Technologies 1168/9A User Manual page 129

1168/9A Probes User's Guide
Calibration for Solder-In and Socketed Probe Heads
Figure 89 Connecting the Probe
9 On the oscilloscope, press the autoscale button on the front
panel.
10
Select Setup menu and choose the channel connected to the
BNC cable from the pull- down menu.
11
Select the Probes... button.
12
Select the Configure Probe System button.
13
Select User Defined Probe from the pull- down menu.
14
Select the Calibrate Probe... button.
15
Select the Calibrated Skew radio button.
Calibrating Probes
129
4