Agilent Technologies 1168/9A User Manual page 88

2 Using Probe Heads
Using N2884A Fine-Wire ZIF tips
Step 7. Attach the ZIF Probe
Head to the Fine Wire ZIF tip
88
Figure 54
While still grasping the tip with flat nose tweezers, use
another set of tweezers to lift the latch to the open position
as shown in
wires. The picture shows the standard ZIF tip and is only
meant to highlight the latch's open position (the latch is the
same on the standard and Fine Wire ZIF tips).
Zif tip
Figure 55
Removing the ZIF Tip
Figure 55 on page 88). Be careful to not hit the
ZIF Probe Head
ZIF Tip Latch in Open Position
Fine Wire ZIF tip
This is what the
latch looks like
when it is in the
open position
1168/9A Probes User's Guide