Configure The Printer; Configuring For Netware; Using Nwadmin To Set Up Your Printer - Epson Stylus Color 850Ne Setup Manual

Setup Guide: Configure the Printer
Note:
When printing using bindery
correspondence clients,
make the object related to
the print server right under
the Bindery context in the
directory tree.
Confirm the bindery context
path from the server with the
SET BINDERY CONTEXT
command. See your
NetWare documentation for
more information.
When you print a text file
using the NPRINT command
or DOS redirection,
misconversion or a gap in
characters might occur
depending on the client
environment.
3

Configure the Printer

Configuring for NetWare

You can configure the printer for NDS or bindery with
NwAdmin and EPSON Net!2. (If you want to use
PCONSOLE, see Chapter 4 in your Administrator's Guide.)
Before you follow the steps in the sections below, check whether
you want to use the printer as a dedicated print server or as a
remote printer. (See page 4-1 in your Administrator's Guide for
details.)

Using NwAdmin to Set Up Your Printer

You must first use NwAdmin to define your printer, define a
print server, and set up a queue. If the client does not
correspond to NDS, set up the printer, print server, and queue
in the bindery context. (If you need to use PCONSOLE, see
Chapter 4 in your Administrator's Guide.)
Follow these steps to set up your printer:
1. Log in to the NDS tree (or to the server with Bindery
context) with admin or supervisor privileges.
2. Run the administrator tool (NwAdmin).
16