Attach The Paper Support; Install The Ink Cartridges - Epson Stylus Color 850Ne Setup Manual

Setup Guide: Set Up the Printer
Note:
Follow all the safety
instructions in the
Introduction of your User's
Guide .
Caution:
Always use the P power
button to turn the printer on
or off. Never use the external
switch on a power strip.
Don't use an outlet controlled
by a wall switch or timer, or
one that uses the same
circuit as a large appliance.
This may disrupt the power,
which can erase memory or
even damage the power
supply.

Attach the Paper Support

Insert the paper support in the top slot on the back of the
printer.
Do not put the printer:
In an area with high temperature or humidity
In direct sunlight or dusty conditions
Near sources of heat or electromagnetic interference, such
as loudspeakers or cordless telephone base units

Install the Ink Cartridges

1. Make sure the printer is turned off (the P power button
should be up). Then plug the printer's power cord into a
grounded outlet.
6
power button