Page 2
FUNCTIONAL DESCRIPTION MANUAL OFF MODE: Note: All function adjustments will be auto- • Transmits flame OFF command. • matically accepted 15-seconds after pressing Pilot Method: Intermittent Pilot Ignition a given touch zone or button. The user may (IPI)/Spark-to-Pilot only (continuous/ standing pilot not allowed) press the MODE/SET button to immediately accept the adjustment manually.
Page 3
to change the SET TEMP (45-90 deg. F, • MODE Zone: THERMO and ON are 7-32 deg. C); the new set temperature displayed will automatically be accepted after 2 • ROOM TEMP Zone: Measured tempera- seconds. The factory default SET TEMP ture is displayed is 68 deg.
Page 4
2. Touch the UP or DOWN Buttons to adjust • To enter Program Setup, touch and hold the day of week (press the MODE/SET the TIME/PROG Zone for 5 seconds. Button or wait for 15 seconds for adjust- • Program OFF LCD Displays: ment to be accepted, then enter hour of •...
Need help?
Do you have a question about the SKYTECH J7675 and is the answer not in the manual?
Questions and answers