Step 1; Step 2 - modway EEI-3916 Quick Start Manual

EEI-3916 CHAIR

STEP 1:

1. Please put Chair Body (1) upside down on a carpeted or padded surface.
2. Open the zipper on the bottom of the Chair Body (1) and take out the 4 pieces of Stainless steel legs (2) and
hardware package.
Stainless steel leg
3. Attach 1 piece of
with 3 pieces of Spring Washers (B) and 3 pieces of Flat Washers (C) as shown.
4. Repeat the same steps for the remaining 3 pieces of Stainless steel legs (2).
5. Use Allen Wrench (D) to tighten all Bolts (A) clockwise as shown.

STEP 2:

Close the zipper on the bottom of the Chair Body (1). Carefully turn over the Chair.
Customer Service 609-256-9000︱www.modway.com
(2) to the bottom of the Chair Body (1) by using 3 pieces of Bolts (A)
Assembly is complete. Your Chair is ready to enjoy now!
Page 2 of 2