Table of Contents
Advertisement
Changing Oil
•
Place generator on a level surface.
•
Run the generator for several minutes until the engine is warm. Turn off generator.
•
Remove screws, then remove outer casing side cover.
•
Remove the crankcase dipstick.
•
Place an oil pan underneath the engine. Tilt generator to collect used oil. Allow oil to drain completely.
•
Return generator to a level surface.
•
(Crankcase Dipstick hole).
•
Use a clean rag to wipe up any spilled oil.
•
Replace crankcase dipstick.
•
Reinstall outer casing side cover and tighten screws.
Recommended Engine Oil:
Recommended Engine Oil Grade:
Engine Oil Quantity:
CAUTION!
the engine.
Make sure no foreign matter enters the crankcase
CAUTION!
MAINTENANCE
SAE 10W-30
API Service SE type or higher quality of engine oil.
0.35L (0.924 US gal)
20
Advertisement
Table of Contents
