Broan Elite EBS1244SS User Instructions page 22

USE
• The apparatus is equipped with the
A B C D E F
following lighted controls:
A = LIGHT
B = OFF
C = SPEED I
D = SPEED II
E = SPEED III
F = AUTOMATIC STOP TIMER - 15 minutes (*)
(*) The "automatic stop timer" delays stopping of the hood, which will continue
functioning for 15 minutes at the operating speed set at the time this function is activated.
•
Active carbon/grease filter saturation:
- When button A flashes at a frequency of 2 seconds, the grease filters must be cleaned.
- When button A flashes at a frequency of 0.5 seconds, the carbon filters must be replaced.
After the clean filter has been replaced, the electronic memory must be reset by pressing
button A for approximately 5 seconds, until the light on the button stops flashing.
- 22 -