Advertisement
Centre cover
Fig. 241 Removing the centre covers by pulling.
First read and observe the introductoryinformation and safety warnings
Introduction
The centre wheel trim protects the wheel bolts and must be fitted again after changing the wheel.
Removing and installing the centre wheel trim
• To remove: take the wire hook from the vehicle tool kit
⇒
edge of the cover
Fig. 241
.
• Remove the cover in the direction of the arrow.
• To replace: press the centre wheel trim against the rim until you feel it engage.
Wheel cover
Fig. 242 Removing the wheel covers.
First read and observe the introductoryinformation and safety warnings
Introduction
The wheel cover protects the wheel bolts and must be fitted again after changing the wheel.
Removing the wheel covers
• Take the box spanner and wire hook from the vehicle tool kit
• Insert the wire hook into one of the holes in the wheel cover.
• Push the box spanner through the wire hook
direction of the arrow.
Fitting the wheel covers
• Screw in the anti-theft wheel bolt at position
• Press the wheel cover onto the rim so that the valve hole is located over the tyre valve
⇒
Fig. 245
①
.
The wheel cover must engage securely in position around the entire circumference.
Wheel bolt caps
Fig. 243 Removing the wheel bolt caps.
⇒
⇒
Vehicle toolkit
and hook it into the
⇒
⇒
Vehicle toolkit
.
⇒
Fig. 242
and remove the wheel cover in the
⇒
Fig. 245
② or ③.
Advertisement
