Advertisement
• Perpendicular parking (mode 1): reverse parking perpendicular to the road.
• Parallel parking (mode 2): reverse parking parallel to the road.
• Trailer support (mode 3): support when hitching a trailer to the vehicle.
• Crossing traffic (mode 4): observing crossing traffic.
System limits
The rear view camera system shows only two-dimensional images on the screen. The lack of depth
of field means that potholes and protruding objects on the ground may only be detected with
difficulty, or may not be detected at all.
The rear view camera system may not always be able to detect objects such as thin rails, fences,
posts, trees etc. This could result in damage to your vehicle.
The system displays the orientation lines irrespective of the area surrounding the vehicle. There is
no automatic obstacle detection. Drivers must judge for themselves whether the vehicle will fit into
the parking space.
WARNING
Using images from the camera to estimate the distance from obstacles (people, vehicles
etc.) is inaccurate and could cause accidents and severe injuries.
• Camera lenses enlarge and distort the field of vision and make objects appear different
and inaccurate on the screen.
Switching on and off
First read and observe the introductoryinformation and safety warnings
Introduction
Switching on the rear view camera system
• Select reverse gear.
• OR: press the
button.
Switching off the rear view camera system
Drive forwards at a speed of at least 15 km/h (9 mph).
Display representation
First read and observe the introductoryinformation and safety warnings
Introduction
The image of the rear view camera system is displayed in the Infotainment system.
The functions and displays depend on the vehicle equipment and may differ from each other.
The rear view camera system hides all orientation lines and guiding functions when the factory-
fitted towing bracket is electrically connected to the trailer
Settings
You can make settings by means of the function buttons when the rear view camera system is
switched on. Some setting options depend on the vehicle equipment.
Function buttons and symbols of the rear view camera system:
xClose current display.
Switch to perpendicular parking (mode 1)
the road (mode 1)
.
Switch to parallel parking (mode 2)
(mode 2)
.
Switch to trailer support (mode 3).
display: brightness, contrast, colour.
Control
.
Show Park Distance Control display.
Switch Park Distance Control sound on and off.
vehicle (mode 2).
Orientation lines
Green horizontal line: extension of the vehicle.
Red lateral line: a yellow line turns red if a change in the steering input is necessary (mode 2).
Yellow lines: vehicle path depending on the steering angle.
Yellow auxiliary boxes: front and rear limits of the parking space (mode 2).
Green lateral line: turning point when driving into a parking space (mode 2).
⇒
Trailer towing
.
⇒
Parking perpendicular to
⇒
Parking parallel to the road
Switch to crossing traffic (mode 4).
⇒
Switch to Park Distance Control
Park Distance
Hide Park Distance Control display.
Turn steering wheel (mode 2).
⇒
⇒
Adjust
Stop
Advertisement
