Proper Use; Technical Data; Before Starting The Equipment - EINHELL EXPERT TE-CC 315 U Original Operating Instructions

Anleitung_TE_CC_315_U_SPK8__ 19.11.12 15:56 Seite 30
GB
2.4 Supplied package
Format circular saw
n
Parallel stop (3) with stop rail (2)
n
Push stick (6)
n
Cross stop (11)
n
Stop rail for cross stop (13)
n
Auxiliary edging plate (16)
n
Saw blade guard (18)
n
Extractor hose (19) with 2 hose clips (28)
n
4x Rubber feet (20)
n
Chassis (21)
n
4x Legs (22)
n
Mounting for extractor hose (26)
n
Installation tools (see point 2.2)
n
Assembly material (see point 2.3)
n

3. Proper use

The bench-type circular saw is designed for the
slitting and cross-cutting (only with the cross stop) of
timber, commensurate with the machine's size. The
machine is not to be used for cutting any type of
round wood.
The machine is to be used only for its prescribed
purpose. Any other use is deemed to be a case of
misuse. The user / operator and not the
manufacturer will be liable for any damage or injuries
of any kind caused as a result of this.
Please note that our equipment has not been
designed for use in commercial, trade or industrial
applications. Our warranty will be voided if the
machine is used in commercial, trade or industrial
businesses or for equivalent purposes.

4. Technical data

See warranty card of your country.
Wear ear-muffs.
The impact of noise can cause damage to hearing.
„The quoted values are emission values and not
necessarily reliable workplace values. Although there
is a correlation between emission and immission
levels it is impossible to draw any certain conclusions
as to the need for additional precautions. Factors
with a potential influence on the actual immission
level at the workplace include the duration of impact,
the type of room, and other sources of noise etc.,
e.g. the number of machines and other neighboring
operations. Reliable workplace values may also vary
from country to country. With this information the
30
user should at least be able to make a better
assessment of the dangers and risks involved."
Keep the noise emissions and vibrations to a
minimum.
Only use appliances which are in perfect working
n
order.
Service and clean the appliance regularly.
n
Adapt your working style to suit the appliance.
n
Do not overload the appliance.
n
Have the appliance serviced whenever
n
necessary.
Switch the appliance off when it is not in use.
n
Residual risks
Even if you use this electric power tool in
accordance with instructions, certain residual
risks cannot be rules out. The following hazards
may arise in connection with the equipment's
construction and layout:
1. Lung damage if no suitable protective dust mask
is used.
2. Damage to hearing if no suitable ear protection is
used.

5. Before starting the equipment

This machine may only be assembled by trained
n
personnel or other personnel with similar
qualifications.
Before you connect the equipment to the mains
n
supply make sure that the data on the rating plate
are identical to the mains data.
Inspect the microswitch of the sliding table
n
regularly to ensure it works correctly. You are
allowed to operate the saw only when the sliding
table is correctly mounted.
Unpack the bench-type circular saw and check it
n
for damage which may have occurred in transit.
All covers and safety devices have to be properly
n
fitted before the machine is switched on.
It must be possible for the blade to run freely.
n
When working with wood that has been
n
processed before, watch out for foreign bodies
such as nails or screws, etc.
Before you actuate the On/Off/Emergency switch
n
(9), make sure that the saw blade is correctly
fitted and that the machine's moving parts run
smoothly.
Check the supplied package to ensure it is
n
complete (see point 2.4).