Smartstart; Setting The Timeframe - Miele TWR 780 WP Operating Instructions Manual

Timer

SmartStart

The SmartStart function lets you
define a time period during which your
tumble dryer will start automatically.
The appliance will start on receipt of a
signal, e.g. from your energy supplier,
that indicates that the electricity tariff
is particularly economical.
This function is active when the
SmartGrid setting is switched on.
The timeframe can be defined between
1 minute and 24 hours. During this
period, the tumble dryer waits for the
signal from the energy supplier. If no
signal is sent during the defined period,
the tumble dryer starts the drying pro-
gramme.
52

Setting the timeframe

If you have activated the SmartGrid
function in Settings, SmartStart or
SmartFinish will appear in the display
instead of Start at or Finish at when
you touch the  Timer sensor (see
"Settings – SmartGrid").
The procedure for setting this is the
same as for setting the time for Delay
start.
 Now set the time you want and con-
firm with the
OK
 Touch the Start/Stop sensor to start
the programme with SmartStart.
The selected programme will start auto-
matically, as soon as the energy pro-
vider has sent the signal, or the latest
calculated start time has been reached.
The procedure for changing or delet-
ing the SmartStart function is the
same as described for the Delay start
function.
sensor.