Loading Paper In The Paper Feeder - Epson Stylus 1000 User Manual

After you charge the ink delivery system, you can use the
built-in self test to make sure the printer is working properly.
You can run the self test with paper from the built-in paper
feeder or by feeding a sheet manually. This section describes

loading paper in the paper feeder.

1. Open the paper feeder cover while holding up the lever on
2. Slowly slide the right edge guide as far to the left as it will
go, and align it to the guide mark. Then adjust the left edge
guide to match the width of your paper. You may also use
the guide mark for A4 size paper (or letter /legal size paper
for the U.S. version). When you load paper 420 mm (16.5
inches) wide, move the right edge guide as far to the right
as it will go.
C : Letter landscape
D :A4 landscape
E : Legal landscape
F : B4 landscape
Setting Up the Printer
paper
1-13