Epson Stylus 1000 User Manual page 72

48-nozzle ink jet printer
Hide thumbs Also See for Stylus 1000:
Table of Contents

Advertisement

Paper end
No paper is loaded in the printer. Load paper again.
Paper jam
The paper is jammed inside the printer. Follow the steps on
page 3-33.
Ink is low
The ink cartridge is almost out of ink. Get ready to replace the
ink cartridge.
Ink is gone/No ink cartridge
The ink cartridge is empty or not installed. Replace the ink
cartridge with a new one.
Fatal ink system error
Contact your dealer.
Cleaning/Charging
The printer is in the charging cycle or the cleaning cycle. This is
not an error.
Release lever error
The release lever is in the wrong position. Move the release
lever to the correct position.
Back feed/Eject error
The paper is too long. When using continuous paper, tear off
any printed page before ejecting. Use paper that is within the
specified size. See "Technical Specifications" in the Appendix.
Carriage error
A carriage error occurred. Turn off the printer. After a few
seconds turn it back on again.
Using the Printer
3-23

Advertisement

Table of Contents
loading

Table of Contents