Epson Stylus 1000 User Manual page 68

Make sure the printer stops printing and both the INK OUT
1.
and PAUSE lights stay on. Then open the printer cover.
2. Hold down the ALT button for several seconds and release
the button when the print head moves to the ink cartridge
replace position.
3. Pull the ink cartridge clamp toward you to release the
cartridge. (The clamp pushes the ink cartridge up so it is
easy to grasp.)
4. Lift the cartridge out of the printer and dispose of it properly.
Do not take the used cartridge apart or try to refill it.
Warning:
The ink cartridge is self-contained to prevent leaks. However, if
ink gets on
water. Avoid touching your eyes. lf irritation occurs, contact a
physician.
5. Turn to page l-11 and follow the instructions from step 5 on
to install the new cartridge. After installing, make sure that
you press the PAUSE button and that the PAUSE light is
turned off.
Note:
When you replace the cartridge, the printer does not recharge the ink,
delivery system again. However, the print head may start moving 07s
the printer performs normal maintenance procedures. This can take up
to 40 seconds to complete.
your
hands, wash them thoroughly with soapy
Using the Printer 3-19