Advertisement
Bends up to 90 degrees
Size
Schedule 40
1/2"
3/4"
1"
1-1/4"
1-1/2"
2"
49653 – 16 Ton Hydraulic Pipe Bender
Property
Specification
Max. Capacity
16 Tons
Max. Bending Capacity
3" Diameter Round
Max. Travel
9-1/2"
Hyd. Oil Reservoir Capacity
15 oz. (450 ml)
Hydraulic Oil
H32
Cast Iron Bends
1/2" 3" Pipes
Bending Applications
Black Pipe, Galvanized Pipe
Max. Pipe Wall Thickness
0.196"
Bending Die Diameters
1/2 in., 3/4 in., 1 in., 1-1/4 in., 1-1/2 in., 2 in., 2-1/2 in. and 3 in.
Dimensions, in.
24-3/4 x 8-3/4 x 22-1/2
Shipping Weight
163.0 lbs.
49654 - 16 Ton Air/Hydraulic Pipe Bender
Property
Specification
Max. Capacity
16 Tons
Max. Bending Capacity
3" diameter Round
Max. Travel
9 1/2"
Hyd. Oil Reservoir Capacity
22 oz. (650 ml)
Hydraulic Oil
H32
Cast Iron Bends
1/2" 3" Pipes
Bending Applications
Black Pipe, Galvanized Pipe
Max. Pipe Wall Thickness
0.196"
Operating Air Pressure
90 PSI
Bending Die Diameters
1/2 in., 3/4 in., 1 in., 1-1/4 in., 1-1/2 in., 2 in., 2-1/2 in. and 3 in.
Dimensions, in.
24-3/4 x 8-3/4 x 22-1/2
Shipping Weight
163.0 lbs.
12-16TON PIPE BENDERS
OWNER'S MANUAL
Schedule 80
Yes
Yes
Yes
Yes
Yes
Yes
Yes
No
Yes
No
Yes
No
2 of 11
Important Safety Information
WARNING:
• Read and understand all instructions. Failure to follow all instructions may result in serious
injury or property damage.
• The warnings, cautions, and instructions in this manual cannot cover all possible conditions
or situations that could occur. Exercise common sense and caution when using this tool.
Always be aware of the environment and ensure that the tool is used in a safe and
responsible manner.
• Do not allow persons to operate or assemble the product until they have read this manual
and have developed a thorough understanding of how it works.
• Do not modify this product in any way. Unauthorized modification may impair the function
and/or safety and could affect the life of the product. There are specific applications for
which the product was designed.
• Use the right tool for the job. DO NOT attempt to force small equipment to do the work of
larger industrial equipment. There are certain applications for which this equipment was
designed. It will do the job better and more safely at the capacity for which it was intended.
DO NOT use this equipment for a purpose for which it was not intended.
• Industrial or commercial applications must follow OSHA requirements.
WARNING:
• This product may contain chemicals known to the State of California to cause cancer, birth
defects or other reproductive harm.
WARNING:
WORK AREA SAFETY
• Inspect the work area before each use. Keep work area clean, dry, free of clutter, and well lit.
Cluttered, wet, or dark work areas can result in injury. Using the tool in confined work areas
may put you dangerously close to other cutting tools and rotating parts.
• Do not allow the product to come into contact with an electrical source. The tool is not
insulated and contact will cause electrical shock.
• Keep children and bystanders away from the work area while operating the tool. Do not allow
children to handle the tool.
• Be aware of all power lines, electrical circuits, water pipes, and other mechanical hazards in
your work area. Some of these hazards may be hidden from your view and may cause
personal injury and/or property damage if contacted.
PERSONAL SAFETY
• Stay alert, watch what you are doing, and use common sense when operating the tool. Do
not use the tool while you are tired or under the influence of drugs, alcohol, or medication. A
moment of inattention while operating the tool may result in serious personal injury.
• Dress properly. Do not wear loose clothing, dangling objects, or jewelry. Keep your hair,
clothing and gloves away from moving parts. Loose clothes, jewelry, or long hair can be
caught in moving parts. Air vents on the tool often cover moving parts and should be
avoided.
• Wear the proper personal protective equipment when necessary. Use ANSI Z87.1 compliant
safety goggles (not safety glasses) with side shields, or when needed, a face shield. Use a
dust mask in dusty work conditions. Also use non-skid safety shoes, hardhat, gloves, dust
collection systems, and hearing protection when appropriate. This applies to all persons in
the work area.
• Do not overreach. Keep proper footing and balance at all times.
• Do not use the tool when tired or under the influence of drugs, alcohol or medication.
• Secure the work with clamps or a vise instead of your hand when practical. This safety
precaution allows for proper tool operation using both hands.
12-16TON PIPE BENDERS
OWNER'S MANUAL
3 of 11
Advertisement
