1/2in. x 50ft. fully enclosed air hose reel (14 pages)
Summary of Contents for Klutch 57483
Page 1
Torque Multiplier Owner’s Manual WARNING: Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions may result in serious personal injury. Item #57483 READ & SAVE THESE INSTRUCTIONS...
Page 2
Thank you very much for choosing a Klutch™ product! For future reference, please complete the owner’s record below: Serial Number/Lot Date Code: ________________________________ Purchase Date: ____________________________________________ Save the receipt, warranty, and this manual. It is important that you read the entire manual to become familiar with this product before you begin using it.
Table of Contents Intended Use ............................4 Technical Specifications ........................4 Important Safety Information ....................... 4 Specific Operation Warnings ....................... 5 Operating Instructions .......................... 6 After Each Use ............................7 Troubleshooting ............................ 7 Replacement Parts ..........................7 Limited Warranty ........................... 8 Page 3 of 9...
Intended Use The Klutch Torque Multiplier is a newly designed wheel wrench that allows the user to easily loosen truck tire or car tire lug nuts. This wrench requires little effort to reach a sufficient output torque, and does not require the use of an impact wrench.
flammable liquids, gases, or dust. Do not allow the product to come into contact with an electrical source. The tool is not insulated and contact will cause electrical shock. ⚠WARNING PERSONAL SAFETY Stay alert, watch what you are doing, and use common sense when operating the tool. Do not use the tool while you are tired or under the influence of drugs, alcohol, or medication.
Operating Instructions ⚠WARNING When fastening the screw nut, don’t use more than 100Nm. When you have 180 degrees of swing in the crank handle before encountering tension, the nut is fully tightened. Support Socket (1” Drive) Torque Multiplier Crank Handle Extension Bar 1.
After Each Use When fastening the screw nut, don’t use more than 100Nm. Remove crank handle and socket from torque multiplier and extension bar. Replace all parts into the supplied case for secure storage. Troubleshooting Do not exceed the rated capacity of the torque multiplier being used. Excessive force may result in tool failure.
Northern Tool and Equipment Company, Inc. ("We'' or "Us'') warrants to the original purchaser only ("You'' or "Your") that the Klutch product purchased will be free from material defects in both materials and workmanship, normal wear and tear excepted, for a period of one year from date of purchase.
Page 9
Distributed by: Northern Tool & Equipment Company, Inc. Burnsville, Minnesota 55306 www.northerntool.com Made in China Page 9 of 9...