Table of Contents
Advertisement
Thank you very much for choosing a Klutch product! For future reference, please complete the
owner's record below:
Model: _______________
Save the receipt, warranty and these instructions. It is important that you read the entire manual
to become familiar with this product before you begin using it.
This machine is designed for certain applications only. The distributor cannot be responsible for
issues arising from modification. We strongly recommend this machine not be modified and/or
used for any application other than that for which it was designed. If you have any questions
relative to a particular application, DO NOT use the machine until you have first contacted the
distributor to determine if it can or should be performed on the product.
For technical questions please call 1-800-222-5381.
INTENDED USE
The machine is intended for hammer drilling in concrete, brick and stone. It is likewise suitable
for drilling without impact in wood, metal, ceramic and plastic.
TECHNICAL SPECIFICATIONS
Electrical Requirements
Blows Per Minute
Variable Speed Settings
Handle Types
Included Chisels
Chisel Shank Size
Chisel Retainer
Note: SDS and SDS MAX chisels (both not included) can be used with this Demolition Breaker.
GENERAL SAFETY RULES
WARNING:
below may result in serious injury.
120 V~ / 60 Hz / 1500 W
20 A (Start Up) / 9.5 A (No Load) / 13.0 A (With Load)
Power Cord Type: 82" Long / 14 AWG x 2C
Power Cord Plug Type: 2-Prong / Polarized
Power Switch Type: 2-Position Toggle Switch w/Slider
Cover
900 ~ 1800 BPM (Using Variable Speed Dial)
1-2-3-4-5-6
Fixed Main Rear Handle (7" x 4-1/4" x 1-3/8")
Rotating Swivel "D" Style Auxiliary Handle (6" x 5" x 1-1/4")
Bull Point (13-7/8" Long / Qty. 1)
Spade (1" Wide x 13-7/8" Long / Qty. 1)
45/64" Diameter
Quick-Release Retainer
Read and understand all instructions. Failure to follow all instructions listed
Purchase Date: _______________
Page of 16
2
Advertisement
Table of Contents
