TUBING NOTCHER
OWNER'S MANUAL
WARNING:
Read carefully and understand all ASSEMBLY AND OPERATION
INSTRUCTIONS before operating. Failure to follow the safety rules and
other basic safety precautions may result in serious personal injury.
Item# 49651
Thank you very much for choosing a Klutch product. For future reference, please complete the
owner's record below:
Serial Number/Lot Date Code: _______________
Save the receipt, warranty and these instructions. It is important that you read the entire manual
to become familiar with this product before you begin using it.
This tubing notcher is designed for certain applications only. Northern Tool and Equipment
cannot be responsible for issues arising from modification or use of this product in an
application for which it was not designed. We strongly recommend that this product not be
modified and/or used for any application other than that for which it was designed.
For technical questions please call 1-800-222-5381.
Table of Contents
Intended Use ----------------------------------------------------------------------------------------------- 1
Technical Specifications ---------------------------------------------------------------------------------- 1
Important Safety Information ----------------------------------------------------------------------------- 2
Specific Operation Warnings ----------------------------------------------------------------------------- 3
Assembly --------------------------------------------------------------------------------------------------- 3
Before Each Use ------------------------------------------------------------------------------------------- 3
Operating Instructions ------------------------------------------------------------------------------------ 3
After Each Use --------------------------------------------------------------------------------------------- 4
Maintenance ----------------------------------------------------------------------------------------------- 4
Parts Diagram ----------------------------------------------------------------------------------------------5
Parts List --------------------------------------------------------------------------------------------------- 6
Replacement Parts ---------------------------------------------------------------------------------------- 6
Limited Warranty ------------------------------------------------------------------------------------------- 6
Intended Use
This tubing notcher is great for assembling and welding tubing in your garage or workshop. Up
to 45° angles can be adjusted in single degree increments. The notcher centers and aligns
round tube automatically. 1/2in. and 5/8in. hole saw arbors can be accommodated (hole saws
are not included).
Technical Specifications
Property
Tubing Capacity:
Required Drill Size
Spindle:
Hole Saw Arbors:
TUBING NOTCHER
OWNER'S MANUAL
Purchase Date: _______________
Specification
2" Tubing
1/2''
1/2"
1/2" and 5/8"
1 of 7
Need help?
Do you have a question about the 49651 and is the answer not in the manual?
Questions and answers