Power Saving Mode (Mode 6); Sleep Mode (Mode 7); Instruction Format - Ebyte E70-433T30S User Manual

Chengdu Ebyte Electronic Technology Co,;Ltd

6.8 Power Saving Mode (Mode 6)

Status M0=0 M1=1 M2=1
Transmitting Transmission is not available.
Receiving Receiving is available.
Baud rate & air Under this mode, the baud rate and air data rate are independent, both receiver and transmitter can have different
data rate baud rate but same air data rate.
The module works under WOR status, it wakes up periodically and monitors the wireless data packets, when data
Advantage packet monitored, the module enters receiving mode and receives complete data packets, and outputs the data
through serial port, and then enters WOR status again, which can save power consumption significantly.
Disadvantage Transmission is not available under this mode, the module must be switched to other mode for data transmission.
Applications Applicable for those devices which have requirement on power consumption and need to receive data.
Note It can only receive the data sent from the transmitter under mode 4.

6.9 Sleep Mode (Mode 7)

Status
Transmitting
Receiving
Others

7.Instruction Format

In configuration mode（Mode 3：M0=1, M1=1, M2=0）, it supports instructions below.
(Only support 9600 and 8N1 format when setting)
No. Instruction format
1 C0 + working parameters
2 C1+C1+C1
3 C2 + working parameters
Chengdu Ebyte Electronic Technology Co,;Ltd
Copyright ©2012–2019，
M0=1 M1=1 M2=1
Transmitting is not available.
Receiving is not available.
Other functions of the module are closed, only can quit sleep mode by switching the M 0, M 1 and M 2 status.
C0 + 5 bytes working parameters are sent in hexadecimal format. 6 bytes in total and
must be sent in succession.
( Save the parameters when power-down )
Three C1 are sent in hexadecimal format. The module returns the saved parameters and
must be sent in succession.
C2 + 5 bytes working parameters are sent in hexadecimal format. 6 bytes in total and
must be sent in succession. ( Do not save the parameters when power-down )
E70-433T30S user manual
Illustration
16