Maintenance Position - jcb 8008 CTS Quick Start Manual

Maintenance Position

1. Park the machine on solid, level ground
I. Release the two track levers
II. Set the hand throttle lever to the idle position
2. Lower the dozer blade (B)
3. Lower the excavator so the attachment is flat on the ground (A)
Fig 15
A Attachment flat on the ground
B Dozer blade lowered to ground
4. Stop the engine
5. Discharge the hydraulic pressure
6. Isolate the controls and remove ignition key
7. Isolate the battery to prevent accidental operation of the engine
8008 CTS, 8010 CTS 15