Advertisement
Quick Links
DO NOT CONTACT THE STORE!!!
CALL OUR CUSTOMER SERVICE DEPARTMENT at 1 (800) 225-3865
MODEL #71526
WARNING
Failure to comply with any of the warnings
in these instructions may result in serious
personal injuries such as cuts, broken bones,
nerve damage, paralysis, brain injury, or death.
Failure to comply may also result in property
damage. Please heed all warnings and
cautions. To ensure your safety, do not attempt
to assemble this system without reading and
following all instructions carefully. Identify and
inventory the parts using the Parts List.
Save this instruction in the event that the manufacturer has to be contacted for replacement parts.
INSTRUCTION #1030942 B
VISIT THE LIFETIME WEB SITE:
WWW.LIFETIME.COM
**For U.S. and Canada Customers ONLY:**
IF ASSISTANCE IS NEEDED,
HOURS: 7:00 a.m. to 5:00 p.m. Monday through Friday (Mountain Standard Time)
**Customers outside the U.S. or Canada, please contact the store.**
BACKBOARD AND
RIM COMBO
ASSEMBLY INSTRUCTIONS
AND OWNER'S MANUAL
**A MINIMUM OF TWO
ADULTS ARE REQUIRED FOR
ASSEMBLY**
®
1
6/23/2010
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Lifetime 71526
Summary of Contents for Lifetime 71526
- Page 1 6/23/2010 ® VISIT THE LIFETIME WEB SITE: WWW.LIFETIME.COM **For U.S. and Canada Customers ONLY:** IF ASSISTANCE IS NEEDED, DO NOT CONTACT THE STORE!!! CALL OUR CUSTOMER SERVICE DEPARTMENT at 1 (800) 225-3865 HOURS: 7:00 a.m. to 5:00 p.m. Monday through Friday (Mountain Standard Time) **Customers outside the U.S.
-
Page 2: Parts List
#10 x 7/8” Screw 1. The Backboard can be mounted to any Lifetime Products ® brand pole or most other commercially available poles. If using other than a Lifetime Products ® pole, the mounting bracket design must provide adequate support behind the Rim mounting holes as well as the upper Backboard mounting holes. If adequate support is not provided, the Backboard may be damaged and the warranty will be void. -
Page 3: Before Beginning Assembly
Do not scrape away all of the powder coating. Bare metal may rust. ATTENTION: This Backboard is not designed for custom installations. The Backboard is designed for use with a Lifetime Products Pole Mounting ®... - Page 4 Nuts. (Not actual size) ® NOTE: The Backboard Brackets shown are Lifetime Products models 1C.2 Completely tighten the and are for illustration purposes only. If using Brackets other than the Nuts (RH) from Step 1A. ® Lifetime Products models shown here, refer to the instructions provided To finish the assembly, turn to Page 6...
- Page 5 Backboard. Note: Only hand tighten the Nuts (RH) now. ® NOTE: The Backboard Brackets shown are Lifetime Products models and are for illustration purposes only. If using Brackets ® other than the Lifetime Products models shown here, refer to the instructions provided with the Brackets.
- Page 6 Required For 3.1 Turn the Backboard over so it faces up. 2.1 Use the 1/2” socket head This Page: from the socket head wrench to 1/2” Wrench press one Push Nut (RD) onto one end 3.1 Slide the end of the Axle (RJ) through the Rim (AA) and the Rim Pivot Bracket (RK). of the Axle (RJ).
- Page 7 Required for This Page: 8.1 Remove the plastic film from the Backboard. Electric Drill Note: The lip of the Frame Pad overlaps the front of the Backboard. HH00700 8.2 Attach the Bottom Frame Pad first. Align the small line in the back of the Bottom Frame Pad with the seam in the Backboard FA (8) frame.
- Page 8 If mounting the Backboard to a roof mount, wall mount or existing pole mount that does not have an extension provided, you must use a Mounting Bracket Kit designed for this purpose. Lifetime Products, Inc. offers a Universal Extension ®...
- Page 9 This warranty is nontransferable and is expressly limited to the repair or replacement of defective basketball equipment. If the equipment is defective within the terms of this warranty, Lifetime Products, Inc. will repair or replace defective parts at no cost to the purchaser. Shipping charges to and from the factory are not covered and are the responsibility of the purchaser.
Need help?
Do you have a question about the 71526 and is the answer not in the manual?
Questions and answers