About The Remote Controller; Components: Remote Controller; Status: Remote Controller Lcd - Daikin CTXJ25TVMAW Operation Manual

ON/OFF button
If the remote controller is missing, you can use the ON/OFF
button on the indoor unit to start/stop operation. When operation
is started using this button, the following settings are used:
• Operation mode = Automatic
• Temperature setting = 25°C
• Airfl ow rate = Automatic

2-2 About the remote controller

• Direct sunlight. Do NOT expose the remote controller to
direct sunlight.
• Dust. Dust on the signal transmitter or receiver will reduce
sensitivity. Wipe off dust with a soft cloth.
• Fluorescent lights. Signal communication might be
disabled if fl uorescent lamps are in the room. In that case,
contact your installer.
• Other appliances. If the remote controller signals operate
other appliances, move the other appliances, or contact your
installer.
• Curtains. Make sure that the signal between the unit and
the remote controller is NOT blocked by curtains or other
objects.
NOTICE
• Do NOT drop the remote controller.
• Do NOT let the remote controller get wet.

2-2-1 Components: Remote controller

p
o
n
m
l
k
j
a Signal transmitter
b LCD display
c Temperature adjustment button
d ON/OFF button
e Vertical swing button and menu (push 2 seconds)
f Horizontal swing button
g Comfort airfl ow and Intelligent eye operation button
a
b
c
d
Menu (push 2sec)
e
f
g
h
i
Panel (push 2sec)
h Select button
i Clock button and open panel (push 2 seconds)
j Buttons for ON/OFF timer operation
k Buttons for Weekly timer operation
l Streamer
m Econo and Outdoor unit quiet operation button
n Mode button
o Powerful button
p Fan button
INFORMATION
Use (hold for 2 seconds) to open the front panel when
you clean the air fi lters. See "7-4 To open the front panel" on
page 18.

2-2-2 Status: Remote controller LCD

Icon
Operation is active
Operation mode = Automatic
Operation mode = Drying
Operation mode = Heating
Operation mode = Cooling
Operation mode = Fan only
Powerful operation is active
Econo operation is active
Outdoor unit quiet operation is active
The indoor unit receives a signal from the remote
controller
Current temperature setting
Airfl ow rate = Automatic
Airfl ow rate = Indoor unit quiet
Airfl ow rate = High
Airfl ow rate = Medium high
Airfl ow rate = Medium
Airfl ow rate = Medium low
Airfl ow rate = Low
Description
4