The following commands are affected by this command:
ESC (
ESC.
ESC _
ESC $
ESC,
ESC J
ALLOCATE
Data Control
CR
Format:
code:
Decimal:
Hexadecimal: OD
Comments:
Returns the print position (the position at which the next character is
printed) to the left margin. A line feed will be added if DIP switch l-5
is ON.
Vertical Motion
Form feeding
FF
Format:
code:
Decimal:
Hexadecimal: OC
Comments:
Prints the data in the print buffer, then moves the print position to the
left margin at the beginning of the next page. In other words, this code
starts a new page.
With DIP switch l-7 ON, the form feed operation takes place
automatically when the data exceeds the page length even if no FF
code is received.
With DIP switch l-7 OFF, the data exceeding the page length is
discarded until an FF code is received.
A-8
ESC )
ESC v
ESC I
ESC \
ESC 3
ESC +
CIRCLE
LINE
CR
13
FF
12
Form Feed
Page Printer Commands