Figure 1-7. Pressing the reset lever
4 Installing the Toner Cartridge
The toner cartridge must be installed in the developing unit (which
is already in the printer). Follow these steps:
1.
Remove the block of white packing material from the developing
unit (to the right of the drum cartridge).
2.
Next take the toner cartridge out of its box. Remove the take-up
handle and the tape from the top of the cartridge.
3.
Shake the toner cartridge back and forth several times
horizontally, as shown in Figure 1-8. This distributes the toner
evenly in the cartridge.
Figure 1-8. Distributing the toner
Pi
1-6
set lever
Pin
Setting Up