Care And Maintenance; Troubleshooting; Warranty - Kobalt KRW 124B-03 Manual

CARE AND MAINTENANCE

All maintenance should only be carried out by a qualified service technician.
Cleaning
Before cleaning or performing any maintenance, remove the battery pack. For safe and
proper operation, always keep the tool and its ventilation slots clean.
Always use only a soft, dry cloth to clean your ratchet wrench; never use detergent or alcohol.

TROUBLESHOOTING

WARNING
• Turn the switch to the "OFF" position and remove the battery before performing
troubleshooting procedures.
PROBLEM
Tool does not work.
The socket cannot
be installed.
The motor is
overheating.

WARRANTY

For 5 years from the date of purchase, the tool is warranted for the original purchaser to be
free from defects in material and workmanship. This guarantee does not cover damage due
to abuse, normal wear, improper maintenance, neglect, unauthorized repair/alteration, or
expendable parts and accessories expected to become unusable after a reasonable period of
use. This warranty is limited to 90 days for commercial and rental use.
If you think your product meets the above guarantee criteria, please return it to the place of
purchase with valid proof of purchase and the defective product will be repaired or replaced at
no charge. This guarantee gives you specific legal rights, and you may also have other rights
that vary from state to state.
POSSIBLE CAUSE
Low battery capacity.
The socket does not fit the
sleeve.
Be sure cooling vents are
free of dust and obstacles.
CORRECTIVE ACTION
Charge the battery pack.
Use a suitable adapter or claimed
capacity socket.
Clean and clear the vents. Do not
cover the vents with your hand during
operation.
12
Printed in China