Stopping machine
Stopping machine
WARNING!
When you are entering and leaving the machine, always
face the machine and use the steps or hand holds to avoid
slipping. Always use the "three-point" grip, i.e. both hands
and one foot or both feet and one hand, when entering or
leaving. Do not jump!
1 Release the accelerator pedal.
2 Brake and put the gear selector control in neutral, when the
machine is stationary.
3 Apply the parking brake.
4 Let the engine run at idle speed for at least 1/2 minute before it
is stopped to ensure lubrication and cooling of the
turbocharger.
5 Turn the ignition key to position 0 (turned off).
Operating instructions
69